Shower Grate & Drain

• This is an Internal Shower Grate.

• If a standard grate isn't suitable, please see our Custom Shower Grates.

• Proudly Australian Designed and made to Australian Standards

• Stainless Steel Maintenance

• Online Refund Policy

• Grates & Drains Warranty

Aqualuna Drains - Stainless Steel Grates and Drains

• Grate top pattern is selectable from options listed.
• Grate top is made from 1.5mm - 304 stainless steel.
• Our Heelguard pattern grates are made from 3mm Wedge Wire welded with cross braces and full edge bars around the perimetre.
• Our drain bases come with folds in base to allow water to flow directly to outlet.
• Outlet is 50.8 OD. Outlet is in either the centre or end of the drain.
• All drain bases are fully welded and made from 304 stainless steel.
• DIY or customs do not have folds in the base towards the outlet which is weled onto the base.

When ordering, first choose your length. If you don’t see your length, please click the custom drain button.
After choosing your length, then choose your width, pattern and outlets.

Range of lengths:

• 600mm - 1800mm
• (Longer lengths also available) – Custom lengths also available.

Range of widths:

• 70mm, 85mm, 100mm

Range of Depths:

• 22mm, 25mm, 30mm

Range of types – Decorative and/or Tile Insert:

*Tile inserts is 100mm wide x 30mm deep

Range of Outlet sizes, positions, DIY and custom:

Depending on the grate top, you may have the option of

• Centre Outlet – 50mm / 80mm Outlet in Centre of Drain
• End Outlet - 50mm from the end to the centre of the drain
• Custom Outlet – 38mm, 50mm, 76mm, 80mm, 95mm Outlet where you like
• DIY – Buy the outlet loose and drive and either weld or glue it in where you like