HEELGUARD PATTERN AQUALUNA SHOWER DRAINS
Made from 304 stainless steel. Our shower drains are sold in standard lengths or can be customised to size as per your requirements. Sold as a fully welded unit, our drains are the easy drop in solution for your bathroom.
Our shower drain bases have folds in the base to allow for water flow directly to the outlet. This excludes our DIY outlet and custom position outlet shower drains as they don't have folds towards the outlet, but they have a pressed V in the base but not towards any direction.
Please note for lengths longer than 1500, the tops may be supplied in 2 pieces.
Our Heelguard pattern grates are made from 3mm Wedge Wire welded with cross braces and full edge bars around the perimetre.
Our heelguard pattern is available in 70mm wide x 22mm deep, 85mm wide x 20mm deep or 100mm wide x 20mm deep
- Our 70mm wide drains have the option of either 50.8 OD in the centre or DIY 50mm outlet supplied loose for you to cut an outlet in potion on site.
- Our 85mm wide drains have the option of either 50.8 OD in the centre, end outlet (50mm from end to centre of the hole) or DIY 50mm or 76mm outlet with flange supplied loose for you to cut an outlet in potion on site.
- Our 100mm wide drains have the option of either 80mm OD in the centre or DIY 50mm or 76mm outlet with flange supplied loose for you to cut an outlet in potion on site.
When a standard shower grate won't work, we can modify an existing shower grate to suit your needs.
We can customise the outlet size and position based on your requirements. Please visit our custom shower grate product.
The advantages of our stainless steel heelguard include:
- 3mm Wedge Wire with 4mm Aperture
- 5mm (x20mm deep) edge bar all the way around the grate - eliminating any sharp edges
- Cross bars every 25mm, not touching base of drain the base of the drains allowing plenty of water flow
- Tapered cross bars reduces the buildup of dirt & grime
- Heel & Pet Friendly