Sold in standard lengths, our affordable traditional box grates are the perfect drop in solution that can be easily cut and joined on site to meet your requirements. Our box grates are bolted down to the box ensuring there is no movement as they are driven over. Grates can be removed using an allen key for cleaning.

Available in the following profiles:

• 125mm wide x 80mm deep - Sold in 1, 2 and 3 metre lengths
• 150mm wide x 125mm deep - Sold in 1, 2 and 3 metre lengths
• 200mm wide x 170mm deep - Sold in 2 and 3 metre lengths
• 300mm wide x 170mm deep - Sold in 2 and 3 metre lengths

Sold in standard lengths with end caps, joiners and outlets sold separately. There is no cut out in the base for the outlet position allowing you to cut out its location wherever you require it. Once you select the section profile you would like, the accessories to suit will appear. 

Accessories available to suit:

We also sell Hex Head Screws and Screw Bits as an accessory option. The Hex Head Screws are sold in a pack of 25 screws and we also have a drill bit to suit the screws. Typically 1 pack of screws installs up to 6 accessories. 

Cold galvanising spray is a convenient spray suitable for coating steel and galvanised product. Typically when our box grates are cut down, it leaves the edge exposed. We recommend spraying the ends with a cold galvanising spray. Available for purchase in 400g spray can. 

Please note: grates are all in 1 metre pieces bolted down to the base and have buda.com.au tagging on each grate. 

Simple Steps to Install Box Grate:

• Attach the end caps with screws.
• Drill the bottom to fit the outlet and secure with screws.
• Set the drain above the pipe ready for concrete pour around the grate.
• Pour concrete!

Quick and easy installation!

Please check our Care Guide for Galvanised Products.

This product is made from Hot Dip Galvanised Steel.
It is suitable for use in exterior applications. Some examples include driveways, walkways or garden areas.