Small Floor Waste
Our Internal & External Small Floor Waste will suit a wide range of drainage needs. These small shower grates provide minimal visual impact and a sleek finish to any bathroom or shower. Our Small Floor Waste Products are available in various patterns and sizes to suit a wide range of uses.
- All Small Floor Wastes are Class A
100 x 100 Tile Insert Chrome
Mega Bermuda Tile Insert Drain - the water just disappears without a trace. Smallest depth. Comes with leak control flange.
The Bermuda mega floor grate comes with megaflex leak control flange and undercap mortar exclusion device.
The megaflex flange allows height and tilt adjustment while the undercap tear out section stops mortar and dirt clogging pipes.
The megaflex flange securely enables positive engagement with your waterproof membrane.
- Square 100mm. Suit 81.5mm Tile insert. Outlet to suit 50mm, 80mm or 100mm Pipe. Depth 22.8mm
- Supplied with Strainer. Note strainer will decrease flow rate.
- Tile insert manufactured from solid brass. Finish Chrome Plate.
- Product Drawing
110 x 110 Classic Grate
- 110mm x 110mm Brass Floor Waste - Chrome Plate Finish
- Classic style grate to suit 100mm Waste.
115 x 115 Designer Style / Tile Insert
| Product Drawings | Outlet Sizes Available |
| Lines Pattern | 95mm, 75mm and 45mm |
| Square Pattern | 95mm, 75mm and 45mm |
| Heelguard Pattern | 95mm and 45mm |
| Stainless Steel Tile Insert | 95mm, 75mm/80mm and 45mm |
| Chrome Tile Insert | 95mm and 75mm |
| Plastic Base Heelguard | 90mm and 50mm |
| Black Tile Insert | 95mm and 45mm |
| Black Heelguard | 95mm and 45mm |
115 x 115 Plastic Base with Heelguard
- Plastic Base with + 316 Stainless Steel Heelguard Top
- Plastic base is a greyish colour
- Each drain has a removable plastic strainer that sits inside the outlet to stop rubbish or debris from falling into the outlet pipe.
115 x 115 Black Finish Small Floor Wastes
- A stylish yet affordable Black Stainless Steel Small Floor Waste/Drain range is available in both tile insert and heelguard pattern.
- These are 316 stainless steel coated with a Teflon coating to give them a black finish.
Please note:
- Black version does not have the 80mm outlet option, only the 50 and 100mm options shown in the drawings.
- The grate in the heelguard is slightly smaller to ensure it does not scrape off the black coating when removed and reinserted into the base for cleaning.
Chrome Tile Insert
- Tile insert manufactured from solid brass. Finish Chrome Plate.
- Supplied with Strainer. Note strainer will decrease flow rate.
200mm x 200mm Heelguard
- 200mm x 200mm Wide x 30mm Deep
- Product Drawing
270 x 270 Plastic Stainless Steel Tile Insert
This small square drain is a plastic base with stainless steel edging meaning it can be tiled up to and inside showing only the 316 stainless steel edge while being cheap and afforable with a plastic base.
- Ideal for Pools, Decks and Footpaths. Suitable for pedestrian traffic.
- This drain has a 90mm outlet to suit 100mm pipe.
- Click here to see the spec sheet with sizing and more details.
300mm x 300mm Heelguard
- 300mm x 300mm Wide x 60mm Deep
- Product Drawing
