Shower Grate & Drain

From $165.00
In stock
Our Shower Grate & Drain range starts at 600mm going all the way up to 1800mm and Watermark Approved. Aqualuna shower grates are available in various sizes and styles and ideal for showers and bathrooms.  Vincent Buda & Company stock one of the largest and most comprehensive range of stainless steel drains in Australia.

Aqualuna Drains - Stainless Steel Grates and Drains

  • Lines, Square and Brick Pattern grate top is made from 1.5mm stainless steel
  • Our Heelguard pattern grates are made from 3mm Wedge Wire welded with cross braces and full edge bars around the perimetre.
  • Our drain bases come with folds in base to allow water to flow directly to outlet.
  • All drain bases are fully welded and made from 304 stainless steel.
  • DIY or customs do not have folds in the base towards the outlet which is weled onto the base.
  • On our 70mm wide (all styles), 85mm wide (all styles) and 100mm wide (tile insert) drains the outlet is 50.8 OD. Outlet is in either the centre or end of the drain.
  • On our 100mm wide lines and heelguard pattern drains the outlet is 80mm in the centre of the drain.

When ordering, first choose your length. If you don’t see your length, please click the custom drain button.
After choosing your length, then choose your width, pattern and outlets.

Range of lengths:

  • 600mm - 1800mm
  • (Longer lengths also available) – Custom lengths also available.

Range of widths:

  • 70mm, 85mm, 100mm

Range of Depths:

  • 22mm, 25mm, 30mm

Range of Outlet sizes, positions, DIY and custom:

Depending on the grate top, you may have the option of

  • Centre Outlet – 50mm / 80mm Outlet in Centre of Drain
  • End Outlet - 50mm from the end to the centre of the drain
  • Custom Outlet – 38mm, 50mm, 76mm, 80mm, 95mm Outlet where you like
  • DIY – Buy the outlet loose and drive and either weld or glue it in where you like

Range of types – Decorative and/or Tile Insert:

Dimensions Heelguard Lines Square Brick Tile Insert
70mm wide x 25mm deep Drawing N/A Drawing N/A Drawing
85mm wide x 22mm deep Drawing Drawing Drawing Drawing N/A
100mm wide x 22mm deep* Drawing Drawing N/A N/A  Drawing

*Tile inserts is 100mm wide x 30mm deep


The advantages of our Stainless Steel Heelguard include:

  • 3mm Wedge Wire with 4mm Aperture
  • 5mm (x20mm deep) edge bar all the way around the grate - eliminating any sharp edges
  • Cross bars every 25mm, not touching base of drain the base of the drains allowing plenty of water flow
  • Tapered cross bars reduces the buildup of dirt & grime
  • Heel & Pet Friendly

304 Stainless Steel:

  • This product is made from 304 stainless steel which is recommended to be used internally.
  • 304 stainless steel is typically used in bathrooms, showers, laundries or any other internal use.

Manufacture & Delivery:

  • Stock: 99% of our stock is always available. If the item is not available, we will inform you immediately.
  • The lead time for shower grate modifications is approximately 3-5 business days.
  • Following the manufacture of the grate we will either notify you of pickup or ship them out the following business day.
  • Delivery Costs: For delivery costs, please enter your suburb and post code on the cart page.
  • Approx Delivery Time : Sydney 1 day. Melbourne/Brisbane 2 days. Adelaide 3 days. Perth 5 days.
  • We do offer free pick up if you would like to pick up or organise your own transport.

How to Install Shower Drain:

  • Shower Drain Installation / VID
  • Shower Drain Installation - Timbre Flooring / PDF - JPG
  • Shower Drain Installation - Concrete Flooring / PDF - JPG

To Top